Motorized Hybrid Card reader
Model No.: LM-01-A6
This motorized hybrid card reader is for bank ATM machine, telecome company , Subway access control etc applicaion. It support magnetic card reading with full 3 stripes. Such function is widely use in chinese ATM machine. For RFID card, 13.56MHz mifare card, this normally use in parking lot access control, uptown people ID identify. When refer to the contact IC card reading writing, this model built-in IC card reader writer, it can be use in telecom company's automatic self-service charging machine, or issue new telephone card to customer...This is a wide range use motor card reader, for further detail please contact with Lintech.
Motorized Hybrid Card Reader Features:
--Support IC Card/RF Card(read and write) , Magnetic Card(read only).
--LED light indicate was built-in front of the port.
--Dithered in card available for preventing magnetic card being copied.
--High precision card transmitting channel(moulding).
--Extremely strong card compatibility.
--Double protection port can prevent foreign things entering into machine effectively.
--Can use separately or use together with other equipment.
--Compatible with a lot of communication protocol
--Offer WINDOWS demo program, dynamic link library etc.
--Support customized service.
--Many card stay position suitable to different card operation.
--Eject or retrieve card when power off.
--Most of the drive part by rubber band, it's effection on keeping machine work in quiet.
(2)Money rechargeable Machine
(3)Automatic vending machine
(4)Self-service card recharging machine
||Magnetic card (Read Only) ISO-7811
|Contact IC card (Read and Write) ISO-7816
|Contactless RF card (Read and Write) ISO-14443
||12VDC ± 5% 2.0A
|-20 to 60 C-degrees
||RS232 Default Baud rate: 9600bps ( 1200~115200bps optional)
|Card entry mode
||Card width detect or Magnetic signal detected
|Card entry status
||Regularity / Dithered mode
||Front: Hold/Non-hold; Rear: Hold/Non-hold
||Automatic re-entry and re-read card
||use in the installing case
||54 +/- 1.5mm cards relief
|85 +/- 1.5mm long card
|0.2-2.0mm thick card(adjustable)
||Over voltage or Power Positive and negative were connected wrong
||When power off, card is rejected (need to have spare power supplier connected)
||Magnetic head ≥800,000 ; IC contact ≥500,000 (One pass : One swipe)